OnWood TilesStone Capping brochure
Stone Capping installedStone Capping · Limestone
OnWood TilesStone Capping
Reconstituted Stone Veneer · 510 × 280 mm

Stone Capping
Stone Cladding

The finishing detail that makes a stone wall look properly built. Each capping piece is cast in Australia from the same reconstituted stone veneer as the cladding collections, sitting across wall tops, piers and fence lines to shed water and stand up to the weather with a solid, natural-stone edge.

OnWood TilesStone Capping · the range
01 · The range

A single look, every format

Stone Capping is available in eight colourways across 510 × 280 mm. Suitable for wall tops, piers & fences.

Colours
8
Made
Australia

8 colourways

LimestoneLimestone
SandstoneSandstone
Natural GreyNatural Grey
SlateSlate
EarthEarth
BluestoneBluestone
TravertineTravertine
GraniteGranite
onwoodtiles.com.auColours vary with screen · confirm from a sample2
OnWood TilesSpecification · Stone Capping

Specification

ApplicationWall Tops, Piers & Fences
Size490-510 x 280-300 x 35-45mm
MaterialReconstituted Stone Veneer
Sold ByEach
OriginAustralian Made
Colours8

Installation

Fix over a clean, sound substrate with a flexible cement-based adhesive. Apply the corners first, alternating long and short returns, then fill in the bodies. Dry-stack for a tight mortarless look, or point with an 8-12mm mortar joint. Work from several boxes at once so colour and size spread naturally.

Care

Little upkeep is needed, just brush or hose off dust. Seal with a penetrating stone sealer to keep the fresh-quarried colour, or leave it unsealed to weather to an aged, European patina. Keep stone at least 25cm from a naked flame.

OnWood TilesOnWood Tiles
Showroom
Unit 1/24-26 Hancock Way
Baringa QLD 4551
Hours
Mon Closed
Tue-Sat 10am-4pm
Sun Closed
Phone
0447 766 553
Email
sales@onwoodtiles.com.au
Book a visit
onwoodtiles.com.au/book
ABN
41 522 687 021
onwoodtiles.com.auConfirm all colours and finishes from a physical sample3